The number of USERS used per HOST depends on the HOST specifications and the programs used.
It can be used from 10-20 USERS per 1 HOST.
When it's time to upgrade
Waste time installing Windows and programs on every computer
Every 5 years, you will need to buy a new computer and pay maintenance costs.
Computers are large and consume relatively high electricity costs.
Over a period of 6 years, if you have 40 computers in total, you will have to invest in the cost of the computers (average 14,000 baht per unit), not including the monitor, mouse and keyboard (average 3,540 baht per set), the cost of maintenance which must be replaced every 6 years, and the cost of electricity (250 watts x 8 hours x 245 days x 6 years x 4 baht). We have calculated the costs through the Total Cost of Ownership (TCO) table and summarized them for you here.
Not only will you have to spend a lot of money, you will also have to spend time installing Windows on all 40 computers, programs, virus scans that have to be done one by one, and over time, if the devices break down, you will have to spend a lot of money and time to repair them. The more devices you have, the more money and time you will spend.
On your computer desk, in addition to placing the monitor, mouse and keyboard, general computers also have computer equipment placed on the desk, wasting space, lots of wires, and looking messy.
Over time, these devices break down and cannot be reused, becoming a large amount of electronic waste.
SMART NETCOM system is a computer system that uses the main computer or host as the main control unit, while SMART NETCOM child machines share resources from 1 mother machine to allow up to 20 machines to be used simultaneously independently of each other, along with an intelligent child machine management system that can control remotely, present, block usage, etc., which is suitable for all businesses, educational institutions, classrooms, libraries, companies, or various agencies.
The main computer or host is like a service provider in the network, which is both a storage of programs and data for all users in the network. When a SMART NETCOM client requests service from the host, the host will be responsible for allocating available resources to the SMART NETCOM client and also helps control the usage of other SMART NETCOM client computers.
| CPU: | Intel Core i7-14700F Up 5.4GHz, 20Core, 28Thread |
| Memory: | 64 GB DDR4 3200DIMM |
| Hard Disk : | SSD M2 PCIe 4.0 1TB / HDD SATA 2TB |
| Graphic Card: | GT710 / 2GB DDR3 |
| Warranty: | 3/3/3 Years |
T900It is a device designed to be used as a SMART NETCOM client for the system of sharing system resources (Shared Resource) from the host. The SMART NETCOM client works by pulling data and resources from the host to use independently.
Ethernet 1 Gigabit (10/100/1000)
32 Bit Color
Support Windows XP, 7, 8, 10, 11
Support Windows Server 2003, 2008, WMS2012, 2016, 2019, 2022
Supports a variety of working formats, meeting all your usage needs.
The SMART NETCOM system supports both Windows Client and Windows Server operating systems, meeting all work requirements, whether it is Microsoft Office, various web browsers, or heavy graphics such as Adobe Premier Pro and Photoshop.
OS , APPLICATION
ComeWith a program
A program that helps you manage your computer system more easily. It is used to control client computers in the system, whether it is to limit the rights to access the website, to lock the client screen so that it cannot be used during teaching, or to remotely control the client computer from the parent computer, etc.
SMART NETCOM system can help you solve various problems without having to spend a lot of money because SMART NETCOM system helps you save on investment in buying computers, save on maintenance costs and save a lot on electricity costs.
There is no need to waste time installing these programs because the SMART NETCOM system allows you to install programs by simply installing them on 1-2 host computers. You can then share the programs with all 40 client computers for use simultaneously. And the maintenance of the equipment is easy to take care of by just installing the host computer. This saves you a lot of working time .
SMART NETCOM helps you save space, ทmaking your living space more tidy and making your computer room look more beautiful and comfortable.
Total cost of 41 computers /6years
The company has more than 20 years of expertise in
SMART NETCOM.
50,000 units
Please watch a video demonstrating the system's operation.
And let's listen to the voices of real users.
Our customers
Rajaprachanukroh School 65 SchoolNumber of units: 2072
| CPU: | ARM Cortex A55 1.8GHz, 4-Core (Up to 2.0GHz) |
| Memory: | DDR4：1GB |
| Flash: | eMMC：8GB |
| Ethernet: | 10/100/1000M RJ45 , WOL |
| Display Port: | HDMI Max 1920x1080 , 32 bits Color VGA Max 1920x1080 , 32 bits Color |
| USB: | USB 2.0 * 4 Ports , USB 3.0 * 1 Port |
| Power: | Input：AC 100~240V, 50~ 60Hz / Output：DC 12V, 1000mA |
| Audio Input / Output: | 3.5 mm. Input / Output Jack |
| VESAt: | VESA Mount |
| Size / Weight: | 105 * 105 * 28 mm. / 160 g |
| Operating Temperature : | 0 - 45 °C |
| Operating System: | Windows XP, 7, 8, 10, 11 Windows Server 2003, 2008, 2012, 2016, 2019 , 2022 |
| Wifi Module (Opt. T900W): | 802.11a/b/g/n/ac , BT4.2 |
| Warranty: | 3 Years |
It is a specific program developed specifically for managing SMART NETCOM T900, allowing administrators to set up and check the status of SMART NETCOM T900 through the program, making management easy.
SMART DASHBOARDThe SMART DASHBOARD program is a program for controlling child machines. It helps teachers control teaching more easily. They can see the operation of child machines and block the screen when students play games, including sharing the screen from the parent machine to the child machine.
SMART PROTECT is a specific program developed to prevent program and game installations, as well as prevent computer viruses for the SMART NETCOM system.
Prevent Windows from being damaged
Protect against viruses from websites, emails
Trash does not accumulate in the machine.
Answer: One server can support up to 20 SMART NETCOM T900 devices, depending on the software applications and the server's specifications.
Answer: Installation cannot be performed through the SMART NETCOM T900. All software installations must be done on the Host (main machine) only.
Answer: The SMART NETCOM system operates through a network within the same LAN, requiring the network to be properly prepared for use. The switching hub must support a speed of at least 1 Gbps, and the LAN cables must be CAT5E or higher.
Answer: Yes, it is compatible. Both ERP accounting software and even SAP systems can be used. Currently, many of our clients, including leading organizations and restaurants, are using it.
Answer: Maintenance is very simple because we only need to manage the main Host machine.
Answer: Each SMART NETCOM T900 unit provides an independent session, making it feel as if each user is operating their own individual computer.
Answer: Yes, but!!! In the case of having two servers, the affected SMART NETCOM T900 devices can temporarily connect to the functioning server. Once you report the issue to our company, we will arrange to collect the server, perform an inspection and repair, and return it to you as quickly as possible.
**Prices, promotions and conditions are as determined by Siam Network and Computer Co., Ltd. Payment for products or services will be considered as if you are aware of the terms and conditions of your order.
Order today
Urgent! Special promotion, limited quantity.
